Circular sector explained

A circular sector, also known as circle sector or disk sector or simply a sector (symbol: ), is the portion of a disk (a closed region bounded by a circle) enclosed by two radii and an arc, with the smaller area being known as the minor sector and the larger being the major sector.[1] In the diagram, is the central angle, the radius of the circle, and is the arc length of the minor sector.

The angle formed by connecting the endpoints of the arc to any point on the circumference that is not in the sector is equal to half the central angle.[2]

Types

A sector with the central angle of 180° is called a half-disk and is bounded by a diameter and a semicircle. Sectors with other central angles are sometimes given special names, such as quadrants (90°), sextants (60°), and octants (45°), which come from the sector being one quarter, sixth or eighth part of a full circle, respectively. The arc of a quadrant (a circular arc) can also be termed a quadrant.

Area

The total area of a circle is . The area of the sector can be obtained by multiplying the circle's area by the ratio of the angle (expressed in radians) and (because the area of the sector is directly proportional to its angle, and is the angle for the whole circle, in radians):A = \pi r^2\, \frac = \frac

The area of a sector in terms of can be obtained by multiplying the total area by the ratio of to the total perimeter .A = \pi r^2\, \frac = \frac

Another approach is to consider this area as the result of the following integral:A = \int_0^\theta\int_0^r dS = \int_0^\theta\int_0^r \tilde\, d\tilde\, d\tilde = \int_0^\theta \frac 1 2 r^2\, d\tilde = \frac

Converting the central angle into degrees gives[3] A = \pi r^2 \frac

Perimeter

The length of the perimeter of a sector is the sum of the arc length and the two radii:P = L + 2r = \theta r + 2r = r (\theta + 2)where is in radians.

Arc length

The formula for the length of an arc is:[4] L = r \theta where represents the arc length, r represents the radius of the circle and represents the angle in radians made by the arc at the centre of the circle.[5]

If the value of angle is given in degrees, then we can also use the following formula by:L = 2 \pi r \frac

Chord length

The length of a chord formed with the extremal points of the arc is given byC = 2R\sin\fracwhere represents the chord length, represents the radius of the circle, and represents the angular width of the sector in radians.

See also

Sources

Notes and References

  1. Book: Dewan, Rajesh K. . Saraswati Mathematics . New Saraswati House India Pvt Ltd . 978-8173358371 . New Delhi . 2016 . 234 .
  2. Book: Achatz, Thomas . Anderson . John G. . John G. Anderson . Technical shop mathematics . 2005 . Industrial Press . Kathleen McKenzie . 978-0831130862 . 3rd . New York . 56559272 . 376.
  3. Book: Uppal, Shveta . Mathematics: Textbook for class X . 2019 . . 978-81-7450-634-4 . . 226, 227 . 1145113954.
  4. Book: Larson . Ron . Ron Larson . Bruce H. . Edwards . Calculus I with Precalculus . 2002 . 978-0-8400-6833-0 . 3rd . Boston, MA. . 706621772 . . 570.
  5. Book: Wicks, Alan . Mathematics Standard Level for the International Baccalaureate : a text for the new syllabus . 2004 . Infinity Publishing.com . 0-7414-2141-0 . . 58869667 . 79.