| Wayatinah Dam | |
| Location Map: | Australia Tasmania |
| Location Map Size: | 280 |
| Location Map Caption: | Location of the Wayatinah Dam in Tasmania |
| Coordinates: | -42.4°N 146.49°W |
| Country: | Australia |
| Location: | Central Highlands Tasmania |
| Purpose: | P |
| Status: | O |
| Owner: | Hydro Tasmania |
| Dam Type: | E |
| Dam Crosses: | River Derwent |
| Spillway Count: | 1 |
| Spillway Type: | Uncontrolled |
| Res Name: | Wayatinah Lagoon |
| Plant Name: | Wayatinah Power Station |
| Plant Coordinates: | -42.42°N 146.53°W |
| Plant Operator: | Hydro Tasmania |
| Plant Type: | R |
| Plant Turbines: | 3 x 15.3MW English Electric Francis-type turbines |
| Plant Capacity Factor: | 0.85 |
| Extra: | [1] |
The Wayatinah Power Station is a run-of-the-river hydroelectric power station located in the Central Highlands region of Tasmania, Australia. The power station is situated on the Lower River Derwent catchment and is owned and operated by Hydro Tasmania.
Part of the Derwent scheme that comprises eleven hydroelectric power stations, the Wayatinah Power Station is the sixth power station in the scheme and the second power station in the lower run-of-river system. The power station is located aboveground below Wayatinah Lagoon, a small storage created by the rock-filled Wayatinah Dam on the Derwent River below its junction with the Nive River. Water from the Derwent from Liapootah Power Station and spill from Liapootah Dam flows into Wayatinah Lagoon. Water in the lagoon is diverted by a 2km (01miles)-long tunnel to two low pressure woodstave pipelines, each long. It then descends through three steel penstocks to the Wayatinah Power Station. The tunnel intake structure is provided with two vertical lift, gravity close intake gates designed to cut off full flow. Each of the three steel penstocks is provided with a hilltop valve designed to close under full flow.[2]
The power station was commissioned in 1957 by the Hydro Electric Corporation (TAS) and the station has three 15.3MW English Electric Francis turbines, with a combined generating capacity of of electricity.[3] Within the station building, each turbine has a fully embedded spiral casing and water flow is controlled by a spherical rotary main inlet valve and a turbine relief valve designed to prevent spiral casing overpressure. The station output, estimated to be annually,[1] is fed to TasNetworks' transmission grid via an 11 kV/220 kV three-phase English Electric generator transformer to the outdoor switchyard. An 11 kV indoor switchgear system also supplies a distribution yard that supplies power to the local area from Wayatinah village to and includes the power stations of Liapootah, Wayatinah, Catagunya, Repulse and Cluny.[4]