MS Stena Baltica is a RoPax ferry, owned by Stena Line and operates on the Baltic Sea between Nynäshamn, Sweden and Ventspils, Latvia. The ship previously operated on the Irish Sea, between Birkenhead and Belfast, as Stena Mersey.
The ship was built in Italy by Cantiere Navale Visentini and launched in 2005. As built, the vessel measured and could carry up to 980 passengers. The on-board cabins had space to sleep 480 passengers. There are four vehicle decks with a capacity for approximately 200 trailers. The vessels maximum speed is 27kn, but usually sails at in normal service.
Stena Baltica was launched in December 2005 as Mersey Viking, entering service with Norse Merchant Ferries later the same month. A few months later, Norse Merchant Ferries was acquired by Norfolkline. Mersey Viking received Norfolkline lettering on her red hull but retained her Norse Merchant Ferries funnel for several years.
In July 2010 Norfolkline was acquired by DFDS. The vessel was renamed Mersey Seaways during her refit in August 2010. Later that same year, DFDS sold its Northern Irish operations to Stena Line.[1] In August 2011, the vessel was renamed Stena Mersey[2]
Early in 2012, Stena Mersey, along with her sister ship, was given a complete interior and exterior refit and repaint at Harland and Wolff.
Stena Mersey was replaced on the Birkenhead to Belfast route in February 2021,[3] following the introduction of the in late January 2021. Stena Mersey is due to undergo lengthening at the Sedef Shipyard in Tuzla, Istanbul, with the inclusion of a 36m (118feet) midsection, renamed as Stena Baltica and then re-entering service. Stena Baltica is planned to operate on the Baltic Sea between Nynäshamn and Ventspils.[4]
Stena Mersey operated on the Birkenhead–Belfast route with her marginally older sister ship Stena Lagan. The total journey time on board the ship was 8 hours.
Stena Mersey carried a maximum of 720 passengers.[5]